GTLH Wet type vertical ring

GTLH Wet type vertical ring

Guote also could offer EPC service including engineering design, equipment installation, commissioning services for quartz or other non-metallic minerals products processing line.

  • Dependable
  • Simple
Hotline service:008613280343396
0086-536-3685656

Consult now to enjoy more discounts

24Free plan for hours

Welcome to visit the factory

Introduction

The high intensity magnetic separator with most advanced technology and best performance in the worldwide. 

Whole equipment have swivel vertical rotation and back flush mineral ores functions, following with high frequency vibration motor. 

It has higher enrichment ratio and can adapt different particle size and concentration and grade of mineral ores. And also have advantages of reliable working and easy operation and maintenance.

Feed size: 0-1.2mm

Magnetic strength: 0.8T 1.0T 1.2T 1.4T wet type electro magnetic
Usage: removing weak magnetic iron impurity

Advantages

1、Vertical Swivel with High separation efficiency: Vertical Swivel rotation and back flush mineral ores make the flat ring jam problem shooting.

2、Unique magnetic medium with high magnetic intensity: the company patented magnetic medium could offer high gradient magnetic field with max. Magnetic intensity up to 20000Gs.

3、Good cooling effect with stable magnetic field. The excitation coil adapt hollow tube with higher thickness. The water could flow through tube and take away the heat after water circulation.

4、Widely used for different field and no need maintenance.

GTLH site.jpg



Working Principle

Pulp through the feeding tube into the feed hopper, pulp along the magnetic gap through the swivel,

high permeability of the stainless steel rods inside the ring of the magnetic induction medium magnetized in the background magnetic field, form a high gradient magnetic field, magnetic medium pulp in the magnetic particles are adsorbed on the surface of magnetic medium,

the swivel rotation was taken to to the top of the magnetic field area, by flushing with rinse water pressure, the magnetic materials into concentrate in the bucket, non-magnetic particles along the magnetic gap into the tailings under drained bucket in order to realize the separation of material

Swivel lower magnetic medium of submerged within the ore slurry surface,

at the same time of slurry injection, installed at the side of the tailings boxes of reciprocating motion stroke box constantly doing, make through tympanic membrane separation indoor pulp do fluctuate,

the pulsating flow physical ore grain group always maintain loose state in the process of sorting, effectively remove the particles in material, significantly improve the grade of concentrate.

原理图.jpg详情图4.jpg


Technical Parameters


Model GTLH-500 GTLH-750(Z) GTLH-1000(Z) GTLH-1250(Z) GTLH-1500(Z) GTLH-1750(Z) GTLH-2000(Z) GTLH-2500(Z) GTLH-3000(Z)
Rated background magnetic field(T) 1(0.6)Constant current continuously adjustable
Magnetic field 1.9(1.2)Constant current continuously adjustable
Energizing power(KW) ≤10(6) ≤13(8) ≤17(10) ≤19(12) ≤27(15.5) ≤37(23) ≤42(29) ≤57(37) ≤74(48)
Handing capacity(t/h) 0.1-0.3 0.1-0.5 3.5-7.5 10-20 20-30 30-50 50-80 80-150 150-250
Slurry throughput(m3/h) 0.25-0.5 5-10 12.5-20 20-50 50-100 75-150 100-200 200-400 360-650
Magnetizing current(A) 63 72 85 92 105 124 130 153 185
Slurry density(%) 10-40
Feed particle size -1.0 -1.0 -1.2 -1.2 -1.2 -1.2 -1.2 -1.2 -1.2
Ring speed(r/min) 3
Ring diameter(mm) Φ500 Φ750 Φ1000 Φ1250 Φ1500 Φ1750 Φ2000 Φ2500 Φ3000
Ring motor power(KW) 0.37 0.75 1.1 1.5 3 4 5.5 11 18.5
Ripply motor power(KW) 0.37 1.5 2.2 3 3 4 7.5 11 18.5
Pulsion stroke(mm) 0-30(Mechanically adjustable)
Pulsion frequency(次/分) 0-300(Variable frequency conversion)
Excitation voltage(DCV) 0-409(280)(Change with current)
Unloading water pressure(Mpa) 0.1-0.2 0.1-0.2 0.2-0.4 0.2-0.4 0.2-0.4 0.2-0.5 0.2-0.4 0.2-0.4 0.2-0.4
Water supply pressure(m3/h) 0.65-1.4 1.4-2.5 8-12 12-20 20-30 30-50 50-100 100-150 150-250
Host weight(t) 3(1.5) 5(3.5) 9(7) 14(11) 24(20) 35(28) 50(39) 105(83) 150(135)
Maximum part weight(t) 0.3(0.25) 0.6(0.5) 2.2(2) 4(3.5) 5(5) 11(9) 16(13) 23(18) 24(19)
Dimensions(mm) 1800*1400*1320 2000*1360*1680 2700*2000*2400 3200*2340*2700 3600*2900*3200 3900*3300*3800 4200*3650*4200 5800*6000*5400 7600*6500*7200


IMG_20190624_161432.jpg


©Weifang Guote Mining Equipment Co., Ltd.